DEVELOPMENT AND MODELING OF ELECTROCHEMICAL BIOSENSORS FOR THE DETECTION OF POLLUTANTS IN AQUEOUS PHASE

dc.contributor.authorBOUGUEFFA , Lynda
dc.contributor.authorDOUKHI , Douaa
dc.contributor.authorOUKSEL , Louiza Supervisor
dc.date.accessioned2026-11-09T09:13:05Z
dc.date.issued2026
dc.descriptionتتناول هذه الدراسة تطوير مستشعر حيوي كهر وكيميائي موجه للكشف عن البنسلين G) (Penicillin G اعتمادا على فيلم بوليانيلين/أكسيد الحديد النانوي (PANI/FeNPs) ودراسة سلوكه التحليلي باستخدام تقنيات كهر وكيميائية مختلفة. هدفت هذه العمل إلى تحضير طبقة نشطة على سطح قطب البلتين وتثبيت إنزيم الميالوبيروكسيداز (MPO)من أجل تحسين النتقائية والحساسية في الكشف عن المضاد الحيوي. تم تحضير فيلم PANI و PANI/FeNPsباستخدام الطريقتين الكيميائية )البلمرة التأكسدية في وسط حمضي( والكهروكيميائية( الترسيب بالجهد الدوريCV) ، حيث أظهرت النتائج نجاح تكوين طبقة متجانسة ذات خصائص توصيل جيدة. كما أكدت التحاليل الطيفية (FTIR و UV-Vis)وجود التآثر بين البوليمر وأكسيد الحديد النانوي وتشكيل البنية الهجينة .أظهرت القياسات الكهروكيميائية (CV و EIS)أن تعديل سطح القطب يؤدي إلى تغير واضح في سلوك انتقال اللكترونات، مع زيادة مقاومة النقل الشحني بعد تثبيت الطبقة الحيوية، مما يؤكد نجاح عملية التعديل والتثبيت. كما بينت النتائج أن المستشعر المطور يمتلك استجابة جيدة تجاه تركيزات مختلفة من البنسلين G في المجال من 10⁻⁶ إلى 10⁻⁴ M، مع علقة خطية ومعامل ارتباط مرتفع 0.998) = (R² وحساسية معتبرة.تشير هذه النتائج إلى أن القطب المعدل بـ PANI/FeNPs/SA-MPOيمثل منصة واعدة لتطوير مستشعرات حيوية فعالة للكشف عن المضادات الحيوية، مع أداء تحليلي جيد واستجابة كهروكيميائية مستقرة.
dc.description.abstractThis study focuses on the development of an electrochemical biosensor designed for the detection of Penicillin G, based on a polyaniline/iron oxide nanoparticles (PANI/FeNPs) film and investigated using various electrochemical techniques. The work aimed to prepare an active layer on the surface of a platinum electrode and to immobilize the enzyme myeloperoxidase (MPO) in order to improve selectivity and sensitivity toward the antibiotic. PANI and PANI/FeNPs films were prepared using both chemical methods (oxidative polymerization in acidic medium) and electrochemical methods (cyclic voltammetric deposition). The results confirmed the successful formation of a homogeneous layer with good conductive properties. Spectroscopic analyses (FTIR and UV–Vis) also confirmed the interaction between the polymer and iron oxide nanoparticles, leading to the formation of a hybrid structure. Electrochemical measurements (CV and EIS) showed that surface modification of the electrode led to a clear change in electron transfer behavior, with an increase in charge transfer resistance after immobilization of the bioactive layer, confirming the successful modification and enzyme attachment
dc.description.sponsorshipCette étude porte sur le développement d’un biocapteur électrochimique destiné à la détection de la pénicilline G, basé sur un film de polyaniline/nanoparticules d’oxyde de fer (PANI/FeNPs) et étudié à l’aide de différentes techniques électrochimiques. Ce travail avait pour objectif de préparer une couche active à la surface d’une électrode de platine et d’immobiliser l’enzyme myéloperoxydase (MPO) afin d’améliorer la sélectivité et la sensibilité vis-à-vis de cet antibiotique. Les films de PANI et de PANI/FeNPs ont été élaborés par des méthodes chimiques (polymérisation oxydative en milieu acide) ainsi que par des méthodes électrochimiques (dépôt par voltampérométrie cyclique). Les résultats ont confirmé la formation réussie d’une couche homogène présentant de bonnes propriétés conductrices. Les analyses spectroscopiques (FTIR et UV-Visible) ont également mis en évidence l’interaction entre le polymère et les nanoparticules d’oxyde de fer, conduisant à la formation d’une structure hybride. Les mesures électrochimiques (voltampérométrie cyclique, CV, et spectroscopie d’impédance électrochimique, EIS) ont montré que la modification de la surface de l’électrode a entraîné une variation significative du comportement du transfert électronique. Une augmentation de la résistance au transfert de charge a notamment été observée après l’immobilisation de la couche bioactive, confirmant ainsi la réussite de la modification de l’électrode et de la fixation de l’enzyme
dc.identifier.otherBS-CD 15----MS-2637
dc.identifier.urihttps://repository.univ-setif.dz/handle/123456789/3974
dc.language.isoen
dc.publisherSetif1 university Ferhat Abbas . Faculty of Natural and Life Sciences
dc.titleDEVELOPMENT AND MODELING OF ELECTROCHEMICAL BIOSENSORS FOR THE DETECTION OF POLLUTANTS IN AQUEOUS PHASE
dc.typeThesis

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
BS-CD 15----MS-2637 R.pdf
Size:
543.25 KB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed to upon submission
Description: