Design and fabrication of an immobilization system for External Beam Radiation Therapy
Loading...
Files
Date
Journal Title
Journal ISSN
Volume Title
Publisher
Setif 1 Unuversity Ferhat Abbas . Faculty of Sciences
Abstract
Accurate patient immobilization is crucial in radiotherapy, especially for brain cancer treatments, to protect healthy tissues from radiation damage. Traditional thermoplastic masks and immobilization devices are widely used but often cause patient discomfort and setup inaccuracies over time. The main goal of this study is to design and fabricate a personalized head immobilization device using modern 3D digital and manufacturing technologies.
In this work, a structured light scanner was used to capture the precise 3D anatomical shape of the patient's head safely. This digital data was then used to design a customized a head immobilization device with an optimized thickness of 2.5 mm. The different parts of the customized device (mask and belts) were manufactured using Fused Deposition Modeling (FDM) 3D printing technology with an Artillery Sidewinder X1 printer, utilizing both rigid Polylactic Acid (PLA) and flexible Thermoplastic Polyurethane (TPU) filaments. Simulations with multiphysics “COMSOL” simulator were also performed in order to study the printing material responses and thermal and mechanical behavior during 3D printing and radiotherapy utilization with 6 MV photons beam and at 400 MU/min dose rate over 15 min. The fabricated immobilization device was found accurate and comfortable. PLA and TPU were also found to remain stable under 3D printing and irradiation. In conclusion, the proposed immobilization device design and fabrication technique offers a precise, comfortable, and reliable solution to improve patient setup and safety in brain cancer radiotherapy
Description
ملخص
يُعد التثبيت الدقيق للمريض أمرًا بالغ الأهمية في العلاج الإشعاعي، وخاصةً في علاج سرطانات الدماغ، وذلك لحماية الأنسجة السليمة من الأضرار الناتجة عن الإشعاع. تُستخدم الأقنعة الحرارية اللدنة وأجهزة التثبيت التقليدية على نطاق واسع، إلا أنها غالبًا ما تسبب عدم راحة للمريض وتؤدي إلى انخفاض دقة التموضع مع مرور الوقت. يتمثل الهدف الرئيسي لهذه الدراسة في تصميم وتصنيع جهاز شخصي لتثبيت الرأس باستخدام التقنيات الرقمية الحديثة وتقنيات التصنيع ثلاثي الأبعاد.
في هذا العمل، تم استخدام ماسح ضوئي يعتمد على الضوء المنظم لالتقاط الشكل التشريحي ثلاثي الأبعاد لرأس المريض بدقة وبشكل آمن. ثم استُخدمت هذه البيانات الرقمية لتصميم جهاز مخصص لتثبيت الرأس بسماكة محسّنة قدرها 2.5 مم. وتم تصنيع الأجزاء المختلفة للجهاز المخصص (القناع والأشرطة) باستخدام تقنية الطباعة ثلاثية الأبعاد بالترسيب المنصهر (FDM)، وذلك باستعمال طابعة « Artillery Sidewinder X1 » مع استخدام خيوط من حمض البولي لاكتيك (PLA) الصلب والبولي يوريثان الحراري (TPU) المرن.
كما أُجريت محاكاة متعددة الفيزياء باستخدام برنامج «COMSOL» لدراسة استجابة مواد الطباعة وسلوكها الحراري والميكانيكي أثناء عملية الطباعة ثلاثية الأبعاد وأثناء استخدامها في العلاج الإشعاعي باستخدام حزمة فوتونات بطاقة 6 ميغافولت ومعدل جرعة يبلغ 400 وحدة مراقبة في الدقيقة (MU/min) لمدة 15دقيقة.
أظهرت نتائج الدراسة أن جهاز التثبيت المُصنَّع يتميز بالدقة والراحة. كما تبين أن مادتي PLA وTPU بقيتا مستقرتين أثناء الطباعة ثلاثية الأبعاد وتحت تأثير الإشعاع. وفي الختام، توفر تقنية تصميم وتصنيع جهاز التثبيت المقترحة حلاً دقيقًا ومريحًا وموثوقًا لتحسين تموضع المرضى وتعزيز السلامة في العلاج الإشعاعي لسرطان الدماغ
